- You are here:
- Home »
- Remodeling Tool Kit »
- BOSTITCH BTFP3KIT 3-Tool Portable Air Compressor Combo Kit
BOSTITCH BTFP3KIT 3-Tool Portable Air Compressor Combo Kit
The BOSTITCH BTFP3KIT 3-Tool Portable Air Compressor Combo Kit is ideal for interior and exterior finishing and trimming project for a variety of crafts like furniture, cabinets, and staircases. It features a 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered 90 PSI pump, which enables long tool run time with quick recovery. The air compressor features long-life oil-free, maintenance-free pump for convenient use. It has a BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. At only 78.5 dBA** operational noise level it offers you a quiet work environment. The SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8 in. to 2 in.. SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4 in. to 2-1/2 in.. The BTFP71875 heavy-duty 3/8 in. crown stapler drives 3/8 in. crown staples from 1/4 in. to 9/16 in. and 18GA brad nails from 1/2 in. to 5/8 in.. 1/4 in. x 15′ PVC air hose with fittings, along with 1-1/4 in. 18GA brad nails and 2 in. 16GA straight finish nails and T50 staples are included. Includes: 1) 6-gallon Pancake Compressor, 1) 18GA 2 in. Brad nailer, 1) 2-1/2 in. 16GA Straight Finish Nailer, 1) Heavy Duty 3/8 in. Crown Stapler, 1) 25′ Air Hose, and Sample Fasteners.
Product Features
- CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor
- BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8″ to 2″ for a wide variety of applications
- STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails
- HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8″ Crown staples from 1/4″ to 9/16″
- AIR HOSE: 15-foot, 1/4″ x 25′ PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
- FASTENERS: Sample fasteners allow for instant use of all tools; Pump Type: Oil Free
- WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind
"Click Here!!! to get the best picture, get the best deal, lowest price and more detailed differences and similarities of the product as well as some more important information affecting your purchasing decision."Click Here
Session expired
Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page.
I had read some pretty good reviews on this one I had read some pretty good reviews on this one, and decided to order it. Having been looking around, I found that most 6-gal. pancake compressors were 1 – 1.5 HP. I couldn’t find the horsepower rating on this one’s advertising, specification list nor the manual. Finally I went to the company website and sent them an email asking what was the HP rating. The next day I received their reply and was disappointed to hear it was only 0.8 HP. So with that I decided to let its performance show its worth. It came two days later (fast!). After reading all instructions I turned it on, watching the time it took to reach its max (150) psi. I was surprised it took only less than 3 minutes! With hoses and a tire filler installed I waited a half hour and checked the pressure gage, and it had not shown any noticeable pressure loss. I topped off the tires of both my car and truck and then bled the pressure off. I then turned the unit around, over, upside-down and inspected it over-all for general…
Great for framing gun! No regret purchasing! Worth it! Great Value! Love this compressor! Worked great for recent fence project! Easy to move and had no issues at all! I am so glad that I purchased this and would highly recommend it for framing nail gun or any other projects you may need it for around the house!
Good compressor but maybe a faulty regulator. I finally broke down and bought this air compressor. I have needed one for a while, but kept putting it off. I’m glad I did. Now I can use it to build things, blow out my computer cases, and inflate my car and bike tires.One thing I did notice is the regulator on this unit is not very precise. For instance, when I use an air wrench/ratchet that runs off 90 psi, I set the regulator to 90 psi, and when I use the air ratchet, the regulator drops down to 75-80 psi then when I release the trigger, it will slowly climb back up, but never gets to 90 psi. If I open the regulator a bit and get it back to 90 psi on the dial and hit the trigger again, it drops down to the 75-80 psi again, but then does not go back up to 90. If I open it up to 100 psi, the same thing happens again, it will drop down while in use, but will not climb back up to the set psi. I don’t know if I have a faulty regulator or not, but I have tried it with an air chuck too, and I get the same issue…